SCANTECH ID (Champtek company) IG300BT - Manual (Page 29)

29
<UPC-E ON>
UPC-E OFF
5.9 Disable All Symbologies.
If you want to disable all Symbologies, please
scan below programming code.
Or you can scan
the “Off” option to disable individual symbologies.
Disable All Symbologies
Note: Do not reset individual parameters settings for
each symbology. When you enable a symbology, you
will recover the parameter settings stored in memory.
Anytime, you may reset to factory defaults by scanning
the programming code of “Set factory default” .(please
see Appendixes).