GE Industrial Solutions Record Plus Shunt Trip and Undervoltage Release User Manual

Record plus, Molded case circuit breaker accessories, Shunt trip and undervoltage release

Advertising
background image

DEH40363 Installation Instructions

g

Record Plus™

Molded Case Circuit Breaker

Accessories

Shunt Trip and Undervoltage

Release

Congratulations and thank you for choosing the
Record Plus™

family of current-limiting circuit

breakers. This UL-listed shunt trip or undervoltage

release is suitable for use with the FC100, FB100,

FE150, FE250, FG400, and FG600 circuit breaker
series.
Record Plus™

circuit breakers are designed with a

full line of integrated accessories. All units use the

latest in integrated modular circuit breaker

technology for flexibility in application and

maximizing the product’s utilization and

capabilities.

Record Plus™

circuit breakers are all listed by

Underwriters Laboratories to the UL489 standard

and may be listed to CSA Standard C22.2, No. 5

and IEC60947-2.

They can also be used with our molded case

switches, which are listed per Underwriters

Laboratories to the UL489 standard.

Record Plus™

circuit breakers and their accessories

are designed and manufactured to exceed our

global customers’ high standards for reliability and

quality.

WARNING

: DANGER of electrical shock or injury.

Ensure that ALL electrical power supplies are OFF

before installing or removing any devices. The

breaker, trip unit, or accessories MUST ONLY be

installed and serviced by QUALIFIED personnel. See

NEMA publication AB4.
AVERTISSEMENT: Danger contre les risques

d'électrocutions. S'assurer avant TOUTES

manipulations du disjoncteur que les différentes

sources d'alimentation sont en position OFF. Les

disjoncteurs, unités de protection, ou accessoires

doivent être installés par des personnes qualifiées et

habilitées. Lira NEMA publication AB4.

Figure 1. Shunt trip and undervoltage release accessories.

CAUTION: This product is NOT suitable for use in

equipment not specifically design to accept it.

Contact the equipment manufacturer for possible

equipment modifications.
ATTENTION: Cet appareil nedoit pas etre employe

dans un equipement non specialement adapte a cet

effet. Contactez le constructeur concernant les

possibles modifications a apporter a l'equipement.

Product Description

The shunt trip and undervoltage release (UVR) covered

by these instructions are illustrated in Figure 1. Catalog

numbers for the available configurations are listed in

Table 1, with voltage and current ratings.

Shunt Trip

Undervoltage

Release

Advertising