GE Industrial Solutions Easy View - Manual (Page 19)

Tyco Electronics EasyView Software for the Galaxy Controller
Issue 8 January 2008 Connect to Site - 13
Connect to Site
Connection
Process
Before you connect to any site, the site setup must be completed as
described previously. From the default screen, select F12 or from the
Connect menu, select the Connect to Site option. You may now select
one of the listed sites. EasyView will start the connect process and
display the commands it is sending to the Galaxy controller and
responses it is getting back. When the connection process is completed,
EasyView will obtain the site description, alarms, and warnings of the
Galaxy controller and display them on the default screen.