GE Industrial Solutions EVW020A0A Series (Eighth-Brick) - Manual

Data Sheet
September 7, 2012
EVW020A0A Series (Eighth-Brick) DC-DC Converter Power Modules
36–75Vdc Input; 5.0Vdc Output; 20A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS08-001 ver. 1.08
PDF name: EVW020A0A.pdf
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Compliant to IPC-9592, Category 2, Class II
 High efficiency 92% at 5.0V full load (Vin=48Vdc)
 Industry standard, DOSA compliant footprint
58.4 mm x 22.8 mm x 8.1 mm
(2.30 in x 0.9 in x 0.32 in)
 Wide input voltage range: 36-75 Vdc
 Tightly regulated output
 Constant switching frequency
 Positive remote On/Off logic
 Input under/over voltage protection
 Output overcurrent and overvoltage protection
 Over-temperature protection
 Remote sense
 No reverse current during output shutdown
 Output Voltage adjust: 80% to 110% of V
o,nom
 Wide operating temperature range (-40°C to 85°C)
 UL*Recognized to UL60950-1, CAN/CSA † C22.2
No.60950-1, and EN60950-1( VDE ‡ 0805-1)
Licensed
 CE mark meets 2006/95/EC directive §
 Meets the voltage and current requirements for
ETSI 300-132-2 and complies with and licensed for
Basic insulation rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE
802.3
¤ PoE standards
 ISO ** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed Power Architectures
 Wireless Networks
 Access and Optical Network Equipment
 Enterprise Networks including Power over Ethernet
(PoE)
Options
 Negative Remote On/Off logic
 Over current/Over temperature/Over voltage
protections (Auto-restart)
 Heat plate version (-H)
 Surface Mount version (-S)
Description
The EVW020A0A, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 20A of
output current and provide a precisely regulated output voltage of 5.0V over a wide range of input voltages (V
IN
= 36 -
75Vdc). The modules achieve typical full load efficiency of 92%. The open frame modules construction, available in
both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions.
Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and
overtemperature protection.
RoHS Compliant