GE Industrial Solutions Spectra Series Power Panelboards AMC2FJ, AMC6FLS, AMC3FLS, AMC2FLS - Manual (Page 3)

Filler Plate
Cat. No. Module Type
AFP3SFD
AMC6FJ
AMC4FJ
AFP3SFS
AMC3FJ
AMC2FJ
AFP4SFD
AMC6FLS
AMC4FLS
AFP4SFS
AMC3FLS
AMC2FLS
Table 1. Filler plate kit for each breaker module type.
Attention – Procedure for Aluminum
Terminations
1. Strip the insulation, being careful to not nick the wire.
2. Clean the wire strands with a wire brush.
3. Thoroughly coat the stripped conductor with a
suitable antioxidant compound, such as ALNOX or
PENETROX A13.
4. Insert the conductor and tighten the connector screw
to the indicated torque, as indicated on the rating
label.