GE Industrial Solutions ASPMETER commiss - Manual

TM
POWER MONITORING COMMISSIONING GUIDE
DET-757 PAGE 1 ©2011 For technical support please contact 10111
our GE tech support team at 1-800-GE-1-STOP (1-800-431-7867), Option 4
ASPMETER
Commissioning Guide
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.
• This equipment must only be installed and serviced by qualified electrical personnel.
• Read, understand and follow the instructions before installing this product.
• Turn off all power supplying equipment before working on or inside the equipment.
• Use a properly rated voltage sensing device to confirm power is off.
DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION
• Only install this product on insulated conductors.
Failure to follow these instructions will result in death or serious injury.
DANGER
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• The installer is responsible for conformance to all applicable codes.
• Mount this product inside a suitable fire and electrical enclosure.
FCC PART 15 INFORMATION
NOTE: This equipment has been tested by the manufacturer and found
to comply with the limits for a class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Modifications to this product without the express authorization of
Veris Industries nullify this statement.
TABLE OF CONTENTS
Downloading the Configuration Tool .........................................................................2
Using the Configuration Software .............................................................................3
Configure Device Button .....................................................................................4
Global Resets Button ........................................................................................11
Alarm Status Button .........................................................................................12
Data Monitoring Button ...................................................................................13
Configuring Alarm Registers .....................................................................................15
Latching Alarm Examples .........................................................................................17
ASCII Table ................................................................................................................18
This guide is intended to help the user commission the ASPMETER Panelboard
Monitoring System for operation. It is assumed that the user has already installed the
meter according to the instructions in the ASPMETER Installation Guide.
ASPMETER