GE Industrial Solutions EntelliGuard G Key Interlock Kit User Manual
Page 3
Advertising
8. If the locking mechanism device has been
supplied factory fitted. Remount the mechanism
with its cover into the breaker, making sure that
the operating lever moves freely and interacts
correctly with the breaker mechanism. (Fig. 4)
Figure 4.
9. If supplied as a field mountable kit carefully
remove the dummy lock cover from the Breaker.
Mount the Lock mechanism with its cover into the
breaker, making sure that the operating lever
moves freely and interacts correctly with the
breaker mechanism. (See Fig. 5A, 5B, 5C).
Figure 5A
Figure 5B Tighten to 6 Nm (4.42ft-lbs)
Figure 5C
Tighten to 6 Nm (4.42ft-lbs)
3
Advertising