GE Industrial Solutions 12V Austin SuperLynx 16A - Manual

GE
Data Sheet
May 7, 2013 ©2013 General Electric Company. All rights reserved.
12V Austin SuperLynx TM 16A: Non-Isolated DC-DC Power Module
10Vdc –14Vdc input; 0.75Vdc to 5.5Vdc output; 16A Output Current
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with lead
solder exemption (non-Z versions)
 Delivers up to 16A output current
 High efficiency – 92% at 3.3V full load (V
IN
= 12.0V)
 Small size and low profile:
33.0 mm x 13.46 mm x 8.28 mm
(1.30 in x 0.53 in x 0.326 in)
 Low output ripple and noise
 High Reliability:
Calculated MTBF = 4.4M hours at 25 o C Full-load
 Constant switching frequency (300 kHz)
 Output voltage programmable from 0.75 Vdc to 5.5Vdc
via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4 % (typical)
 Remote On/Off
 Remote Sense
 Output overcurrent protection (non-latching)
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-03
Certified, and VDE ‡ 0805:2001-12 (EN60950-1) Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Enterprise Networks
 Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin SuperLynx TM 12V SMT (surface mount technology) power modules are non-isolated DC-DC converters that can deliver up to
16A of output current with full load efficiency of 92% at 3.3V output. These modules provide a precisely regulated output voltage
ranging from 0.75Vdc to 5.5Vdc, programmable via an external resistor over a wide range of input voltage (V
IN
= 10 – 14Vdc).
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
RoHS Compliant