User settings, Dip switch designations – GE Industrial Solutions ZNET901 User Manual
Page 7
User Settings
DIP Switch Designations
NOTE:
This setting is necessary only if optional printer is used.
Entry of the time and date values for the clock/calendar are entered via the 8-position
DIP switch SW1 (see Page 2). The service push button switch is used to trigger the data
entry. The sequence of operations is as follows:
1. Record the current settings of the DIP switches.
2. Set switches 8 thru 4 OFF and 3 thru 1 ON. Press the service switch. The printer
will print the message “Start clock-calendar set.”
3. Set switches 3 thru 1 according to the following table to set different fields. Switches 8
thru 4 are set to the value of the field in binary code. Press the service switch. The
printer will print a message with the field name and the value. It is only necessary
to set those fields which need to be changed.
High digit of the Year (0-9)
SW3
OFF
SW2
ON
SW1
ON
Low digit of the Year (0-9)
ON
OFF
ON
Month (01-12)
OFF
OFF
ON
Date (01-31)
ON
ON
OFF
Hour (00-24)
OFF
ON
OFF
High digit of the Minute (0-5)
ON
OFF
OFF
Low digit of the Minute (0-9)
OFF
OFF
OFF
8
7
6
5
4
3
2
1
ON
OFF
■
■
Zenith Controls, Inc. ZNET900A, ZNET900B and ZNET901 Operation and Maintenance Manual (18R-1000)
5
■
■