GE Industrial Solutions Austin SuperLynx SMT - Manual

Data Sheet
September 3, 2013
Austin SuperLynx TM SMT Non-isolated Power Modules:
3.0Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 16A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-081 ver. 1.45
PDF name: superlynx_smt_3v-5.5v.pdf
Features
 Compliant to RoHS EU Directive 2002/95/EC (-
Z versions)
 Compliant to ROHS EU Directive 2002/95/EC
with lead solder exemption (non-Z versions)
 Delivers up to 16A of output current
 High efficiency – 95% at 3.3V full load (V
IN
=
5.0V)
 Small size and low profile:
 33.00 mm x 13.46 mm x 8.28 mm
 (1.300 in x 0.530 in x 0.326 in)
 Low output ripple and noise
 High Reliability:
 Calculated MTBF > 6.8M hours at 25 o C Full-
load
 Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4% (typical)
 Remote On/Off
 Remote Sense
 Output overcurrent protection (non-latching)
 Overtemperature protection
 Wide operating temperature range (-40°C to
85°C)
 UL* 60950-1Recognized, CSA † C22.2 No.
60950-1-03 Certified, and VDE ‡ 0805:2001-12
(EN60950-1) Licensed
 ISO** 9001 and ISO 14001 certified
manufacturing facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
Description
Austin SuperLynx TM SMT (surface mount technology) power modules are non-isolated dc-dc converters that can
deliver up to 16A of output current with full load efficiency of 95% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.63Vdc over a wide range of
input voltage (V
IN
= 3.0 – 5.5Vdc). Their open-frame construction and small footprint enable designers to develop
cost- and space-efficient solutions. Standard features include remote On/Off, remote sense, programmable output
voltage, overcurrent and overtemperature protection.
RoHS Compliant