GE Industrial Solutions PicoTLynx 6A - Manual (Page 2)

GE
Data Sheet
PicoTLynx TM 6A: Non-Isolated DC-DC Power Modules
2.4Vdc –5.5Vdc input; 0.6Vdc to 3.63Vdc output; 6A Output Current
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings
only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations
sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.
Parameter Device Symbol Min Max Unit
Input Voltage All V
IN
-0.3 6 Vdc
Continuous
Sequencing Voltage APTH V
SEQ
-0.3 V
iN, Max
Vdc
Operating Ambient Temperature All T
A
-40 85 °C
(see Thermal Considerations section)
Storage Temperature All T
stg
-55 125 °C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
Parameter Device Symbol Min Typ Max Unit
Operating Input Voltage All V
IN
2.4 ⎯ 5.5 Vdc
Maximum Input Current All I
IN,max
6.5 Adc
(V
IN
=2.4V to 5.5V, I
O
=I
O, max
)
Input No Load Current V
O,set
= 0.6 Vdc I
IN,No load
30 mA
(V
IN
= 5.0Vdc, I
O
= 0, module enabled) V
O,set
= 3.3Vdc I
IN,No load
75 mA
Input Stand-by Current All I
IN,stand-by
2.2 mA
(V
IN
= 5.0Vdc, module disabled)
Inrush Transient All I 2 t 1 A 2 s
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1μH source impedance; V
IN
=0 to
5.5V
,
I
O
= I
Omax
; See Test Configurations)
All 25 mAp-p
Input Ripple Rejection (120Hz) All 40 dB
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of
sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum
safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating
of 6A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc
input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further
information.