GE Industrial Solutions LC-LW015-Series - Manual (Page 22)

22 Lineage Power
Data Sheet
March 27, 2008 18 Vdc to 36 Vdc or 36 Vdc to 75 Vdc Inputs, 10 W and 15 W
LC/LW010- and LC/LW015-Series Power Modules:
Outline Diagram
Dimensions are in millimeters and (inches).
Tolerance: x.x ± 0.5 mm (0.020 in.); x.xx ± 0.38 mm (0.015 in.).
If slightly lower height is needed, the four standoffs can be dropped through holes on the user’s PWB. By dropping
the standoffs through the PWB, the module height will be decreased to 9.5 mm (0.375 in.) typical height.
8-1329(C).b
* An optional short pin dimension is 2.8 mm ± 0.25 mm (0.110 in. ± 0.010 in.).
Top View
Side View
Bottom View
Pin Function Pin Function
1 V I (–) 4 V
O
(+) or V
O1
(+)
2 V I (+) 5 COMMON (dual outputs) or
TRIM (optional on single outputs)
Pin is not present on single outputs unless
option is specified.
Pin is always present on dual outputs.
3 ON/OFF or SYNC (optional)
Pin is not present unless one of these
options is specified.
6 V
O
(–) or V
O2
(–)
0.51
(0.020) 10.16 (0.400)
MAX
5.84 (0.230)*
MIN
0.63 (0.025) x 0.63 (0.025)
SQUARE PIN,
ALL PLACES
STANDOFF
DIAMETER 0.63 (0.025)
TYP, 4 PLACES
6
4
3
2
1
15.2
(0.60)
20.32 (0.800)
2.54
(0.100)
5.08
(0.200) 12.7
(0.500)
0.32 (0.0125)
TYP
7.62 (0.300)
24.77
(0.975) 5
10.16
(0.400)
27.9 (1.10)
9.91
(0.39)
7.62
(0.300)
25.4
(1.00)
50.8 (2.00)
+
-
+
-
OUT IN
LC015A
DC-DC Power Module
IN:DC 18-36V, 1.1A OUT:DC 5V, 3A
MADE IN USA