GE Industrial Solutions HW-HC004-005-006 Series - Manual (Page 5)

Data Sheet
October 4, 2013
HW/HC004/005/006 Series DC-DC Power Module:
18-36Vdc & 36-75Vdc Input; 1.0V-5Vdc Output; 4A - 6A Output Current
LINEAGE POWER 5
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter Device Symbol Min Typ Max Unit
Remote On/Off Signal Interface
(V
IN
=V
IN, min
to V
IN, max
; open collector or equivalent,
Signal referenced to V
IN-
terminal)
Negative Logic: device code suffix “1”
Logic Low = module On, Logic High = module Off
Positive Logic: No device code suffix required
Logic Low = module Off, Logic High = module On
Logic Low Specification
Remote On/Off Current – Logic Low All I
on/off
 0.15 1.0 mA
On/Off Voltage:
Logic Low All V
on/off
0.0  1.2 V
Logic High – (Typ = Open Collector) All V
on/off
 5.8 15 V
Logic High maximum allowable leakage current All I
on/off
  10
μA
Turn-On Delay and Rise Times
(I
O
=I
O, max
)
T
delay
= Time until V
O
= 10% of V
O,set
from either
application of Vin with Remote On/Off set to On or
operation of Remote On/Off from Off to On with Vin
already applied for at least one second.
5V, 3.3V
T
delay

100

ms
T
rise
 40  ms
2.5V, 2.0V,
1.8V, 1.5V,
1.2V, 1.0V
T
delay
 12  ms
T
rise
= time for V
O
to rise from 10% of V
O,set
to 90%
of V
O,set
.
T
rise
 3  ms
5V V
O, limit
  7.0 V
Output Overvoltage Protection # 3.3V   4.6 V
2.5V
 
3.5 V
Values are the same for HW and HC codes 2.0V   3.2 V
1.8V
 
2.8 V
1.5V   2.5 V
1.2V   2.0 V
1.0V   1.8 V
Overtemperature Protection
All T
ref

125

°C
(See Feature Descriptions)
Input Undervoltage Lockout
Turn-on Threshold All HW

33 36 V
Turn-off Threshold All HW 27 30  V
Turn-on Threshold All HC

17 18 V
Turn-off Threshold All HC 13.5 15  V
# More accurate Overvoltage protection can be accomplished externally by means of the remote On/Off pin.