GE Industrial Solutions KBVW006A0B Series - Manual

GE
Data Sheet
July 9, 2013 ©2012 General Electric Company. All rights reserved.
KBVW006A0B Series (Sixteenth-Brick) DC-DC Converter Power Modules
36–75Vdc Input; 12.0Vdc Output; 6A Output Current
BARRACUDA* SERIES Features
 Wide input voltage range: 36-75 V
dc
 Monotonic startup into prebiased load
 Output Voltage adjust: 80% to 110% of V
o,nom
 Remote sense
 Constant switching frequency
 Positive remote On/Off logic
 Input under/over voltage protection
 Output overcurrent and overvoltage protection
 Over-temperature protection
 Industry standard, DOSA compliant footprint
33.0 mm x 22.9 mm x 9.3 mm
(1.30 x 0.90 x 0.366 in)
 Low profile height and reduced component skyline
 High efficiency: 91.0%
 Wide operating temperature range (-40°C to 85°C)
 Compliant to RoHS EU Directive 2002/95/EC (-Z versions)
 Compliant to ROHS EU Directive 2002/95/EC with lead
solder exemption (non-Z versions)
 Compliant to IPC-9592A (May 2010), Category 2, Class II
 UL # 60950-1, 2 nd Ed. Recognized, CSA † C22.2 No.
60950-1-07 Certified, and VDE ‡ (EN60950-1, 2 nd Ed.)
Licensed
 CE mark meets 2006/95/EC directive §
 Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for Basic
insulation rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3 ¤
PoE standards
 ISO ** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed Power Architectures
 Wireless Networks
 Access and Optical Network Equipment
 Industrial Equipment
Options
 Negative Remote On/Off logic (preferred)
 Over current/Over temperature/Over voltage protections
(Auto-restart) (preferred)
 Surface Mount version (-S)
 Heat Plate version (-H)
 For additional options, see Table 2 (Device Options) under
“Ordering Information” section.
Description
The KBVW006A0B, Sixteenth-brick low-height power module is an isolated dc-dc converters that can deliver up to 6A of output
current and provide a precisely regulated output voltage of 12.0V over a wide range of input voltages (V
IN
= 36 - 75Vdc). The
modules achieve typical full load efficiency of 91%. The open frame modules construction, available in both surface-mount and
through-hole packaging, enable designers to develop cost and space efficient solutions.
* Trademark of General Electric Company
# UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
RoHS Compliant