GE Industrial Solutions Power-Vac Metal Clad Switchgear; Section 3 User Manual
Page 12
Advertising
51
Fig – A(1)-1
Front upper compartment
For stacks that have a 2 High PT/CPT tray in the front upper compartment, the procedure
for removing the horizontal barrier is different from that shown above. For such stacks,
remove the three taptites ( self threading bolts ) shown in Fig A(1)-2 in the front upper
compartment. When these taptites are removed, the barrier underneath shown in Fig –3
can be removed.
Fig A(1) - 2
Front upper compartment intended for 2-High rollouts
(2) Remove
(3) Remove
(later)
(4) Do not remove
(5) Do not remove
(6) Do not remove
Remove these three taptites
(1) Remove
heater
Advertising