Asus CG8890 - Manual (Page 55)

English
English
ASUS CG8890 5
English
English
Adjust System Level Up via two methods:
BIOS
In the BIOS Setup program, click Extreme.Tweaker.>.System.Level.Up, and configure
the options as needed.
OC.Button
Press the OC button on the upper left side corner of the front panel of your desktop.
Probe.II
Probe II is a utility that monitors the computer’s vital components, and detects and alerts you
of any problems. Probe II monitors fan rotations, CPU temperature, and system voltages,
among others. With this utility, you are assured that your computer is always at a healthy
operating condition.
Launching.Probe.II
After installing AI Suite II from the motherboard support DVD, launch Probe II by clicking
Tool.>.Probe.II on the AI Suite II main menu bar.
Configuring Probe II
Click the Voltage/Temperature/Fan.Speed tabs to activate the sensors or to adjust the
sensor threshold values. The Preference tab allows you to customize the time interval of
sensor alerts, or change the temperature unit.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Loads.the.default.
threshold.values.
for.each.sensor
Applies.changes Loads.your.saved.
configuration
Saves.your.
configuration