Asus ESC1000 Personal SuperComputer - Manual (Page 170)

6-48 Chapter 7: Driver installation
To create a virtual LAN adapter in
Windows ® Vista
1. Launch the Realtek VLAN &
Teaming Utility.
2. Choose one adapter to create the virtual LAN adapter, and then click VLAN.
Click OK to close the message
window and finish creating the
virtual LAN adapter.
3. Click Start > Control Panel >
Network and Sharing Center,
and then click Manage network
connections from the left Tasks
list.
Right-click the virtual LAN adapter
icon and select Properties.
4. Conduct necessary settings for the
virtual LAN adapter, and then click
Configure.
5. Click the Advanced tab in the
Realtek Virtual Miniport Driver for
VLAN (NDIS 6.0) Properties window and conduct necessary VLAN settings.
Close all windows when finished.
To remove a virtual LAN adapter in Windows ® Vista
1. Launch the Realtek VLAN & Teaming Utility.
2. Click Remove to remove the existing virtual LAN adapter.