Asus ESC1000 Personal SuperComputer - Manual (Page 90)

4-26 Chapter 4: BIOS setup
Marvell Storage Controller [Legacy Mode]
Allows you to select the onboard Marvell storage controller mode.
Configuration options: [Legacy Mode] [RAID Mode] [Disabled]
Marvell Storage Boot ROM [Disabled]
This item appears only when you set the previous item to [Legacy Mode] or
[RAID Mode]. Configuration options: [Disabled] [Enabled]
Marvell SAS [Enabled]
Allows you to enable or disable the onboard Marvell SAS controller.
Configuration options: [Enabled] [Disabled]
SAS Boot ROM [Enabled]
This item appears only when you set the previous item to [Enabled].
Configuration options: [Disabled] [Enabled]
Due to DOS environment limitation, only one Boot ROM can be enabled and set
as the boot device. If you enable the Marvell Storage Boot ROM item or set
ICH10R SATA mode to [RAID], the SAS Boot ROM item will be disabled and
hidden.
Realtek LAN1/2 [Enabled]
Allows you to enable or disable the onboard Realtek LAN port1/2.
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
Onboard 1394 Controller [Enabled]
Allows you to enable or disable the onboard 1394 controller.
Configuration options: [Enabled] [Disabled]