2 asus ez flash 2 utility, Asus ez flash 2 utility -5, Asus.ez.flash.2.utility – Asus V6-P5G31E User Manual

Page 43

Advertising
background image

ASUS V6-P5G31E

4-5

ASUSTek EZ Flash 2 BIOS ROM Utility V3.37

Current ROM

Update ROM

A:

Note

FLASH TYPE:

WOINBOND W25X/Q80

PATH:

A:\

BOARD:

P5KPL-AM EPU

VER:

0407

(H:01 B:10)

DATE:

10/10/2009

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit

To.update.the.BIOS.using.EZ.Flash.2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,

then launch EZ Flash 2 in any of these two ways:

• Press <Alt> + <F2> during POST.

• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash

2 and press <Enter> to enable it.

Press <Tab> to switch between drives until the correct BIOS file is found.

4.1.2.

ASUS.EZ.Flash.2.utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an

OS-based utility.

2. When the correct BIOS file is found, EZ Flash 2 performs the BIOS

update process and automatically reboots the system when done.

• Only a USB flash disk with FAT 32/16 format and single partition can

support the ASUS EZ Flash 2 utility.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

Advertising