Asus V6-P5G31E - Manual (Page 50)

4-12 Chapter 4: BIOS setup
PIO.Mode.[Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA.Mode.[Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART.Monitoring.[Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.4 Storage Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Storage Configuration
ATA/IDE Configuration [Enhanced]
Enahnced Mode Support On [S-ATA]
IDE Detect Time Out (Sec) [35]
ATA/IDE Configuration [Enhanced]
Allows you to configure ATA/IDE. Configuration options: [Disabled] [Compatible]
[Enhanced]
Enhanced Mode Support On [S-ATA]
Allows you to set Serial ATA, Parallel ATA or both as native mode.
Configuration options: [S-ATA+P-ATA] [S-ATA] [P-ATA]
IDE.Detect.Time.Out.[35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
Disabled
Compatible
Enhanced
Options