Asus Vintage-AE1 - Manual (Page 88)

5 - 2 8 5 - 2 8 5 - 2 8 5 - 2 8 5 - 2 8 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
5.5.6 5.5.6 5.5.6 5.5.6 5.5.6 Hardware Monitor Hardware Monitor Hardware Monitor Hardware Monitor Hardware Monitor
Hardware Monitor
CPU Fan Speed [3813 RPM]
Chassis Fan Speed [N/A]
CPU Temperature [51ºC/122.5ºF]
MB Temperature [41ºC/105.5ºF]
VCORE Voltage [ 1.320V]
3.3V Voltage [ 3.345V]
5V Voltage [ 5.094V]
12V Voltage [11.880V]
Smart Fan Control [Enabled]
CPU Full Speed Temperature [+40 Degree]
CPU Min Duty Cycle [15 Percent]
CPU Fan Speed [xxxxRPM] or [N/A] CPU Fan Speed [xxxxRPM] or [N/A] CPU Fan Speed [xxxxRPM] or [N/A] CPU Fan Speed [xxxxRPM] or [N/A] CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU
and Chassis fan speeds in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows N/A. Select Ignored if you
do not wish to display the detected fan speed.
CPU Temperature [xxxºC/xxxºF] CPU Temperature [xxxºC/xxxºF] CPU Temperature [xxxºC/xxxºF] CPU Temperature [xxxºC/xxxºF] CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Ignored if you do not wish to
display the detected temperatures.
Resume On PS2 Mouse [Disabled] Resume On PS2 Mouse [Disabled] Resume On PS2 Mouse [Disabled] Resume On PS2 Mouse [Disabled] Resume On PS2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume On RTC [Disabled] Resume On RTC [Disabled] Resume On RTC [Disabled] Resume On RTC [Disabled] Resume On RTC [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values. Configuration
options: [Disabled] [Enabled]