P5ql-m deluxe/wifi-ap chassis intrusion connector, P5ql-m deluxe/wifi-ap analog front panel connector – Asus V4-P5P43 User Manual

Page 71

Advertising
background image

4-9

ASUS V4-Series P5P43

9. Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Connect one end of the chassis intrusion sensor or switch cable to this

connector. The chassis intrusion sensor or switch sends a high-level signal to

this connector when a chassis component is removed or replaced. The signal

is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with

a jumper cap. Remove the jumper caps only when you intend to use the

chassis intrusion detection feature.

P5QL-M DELUXE/WIFI-AP

+5VSB_M

B

Chassis Signal

GN

D

CHASSIS

P5QL-M DELUXE/WIFI-AP Chassis intrusion connector

10. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that

supports either HD Audio or legacy AC`97 audio standard. Connect one end

of the front panel audio I/O module cable to this connector.

• We recommend that you connect a high-definition front panel audio module

to this connector to avail of the motherboard’s high-definition audio capability.

• If you want to connect a high-definition front panel audio module to this

connector, set the Front Panel Type item in the BIOS setup to [HD Audio];

if you want to connect an AC'97 front panel audio module to this connector,

set the item to [AC'97]. By default, this connector is set to [HD Audio]. See

section 5.4.5 Onboard Devices Configuration for details.

P5QL-M DELUXE/WIFI-AP

P5QL-M DELUXE/WIFI-AP Analog front panel connector

AAFP

PIN 1

GN

D

PRESENCE#

SENSE1_RETUR

SENSE2_RETUR

PORT1

L

PORT1

R

PORT2

R

SENSE_SEND

PORT1

L

HD-audio-compliant

pin definition

PIN 1

AGND

NC

NC

NC

MIC

2

MICPWR

Line out_

R

NC

Line out_L

Legacy AC’97

compliant definition

Advertising