Asus V4-P5P43 - Manual (Page 96)

5-22 Chapter 5: BIOS setup
Intel ® SpeedStep™ Technology [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the
EIST. Configuration options: [Enabled] [Disabled]
5.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
South Bridge Configuration
Configure North Bridge
features.
North Bridge Configuration
North Bridge Chipset Configuration
Memory Remap Feature [Enabled]
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Options
128MB
256MB
Options
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. We recommend that you set this item to Enabled when
you install 4GB memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD. Configuration
options: [Enabled] [Disabled]