Asus V4-P5P43 - Manual (Page 94)

5-20 Chapter 5: BIOS setup
Memory Over Voltage [Auto]
Allows you to adjust Memory Over voltage and each step is 6.25mV
SB1.5V Voltage [Auto]
Allows you to set the SB voltage. Configuration options: [Auto] [1.5V] [1.57V]
[1.64V] [1.71V]
SB1.1V Voltage [Auto]
Allows you to set the SB voltage. Configuration options: [Auto] [1.126V] [1.196V]
[1.266V] [1.336V]
CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.8500V to 1.55V
with a 0.00625V interval. Configuration options: [Auto]
Setting a very high voltage may damage the component permanently, and
setting a very low voltage may cause the system to become unstable.
Setting a very high voltage may damage the component permanently, and
setting a very low voltage may cause the system to become unstable.
5.4.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Configure advanced CPU settings
Module Version: 3D.06
Manufacturer: Intel
Brand String: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
Frequency: 1.86GHz
FSB Speed: 1066MHz
Cache L1: 64 KB
Cache L2: 2048 KB
Ratio Status: Unlocked (Max:07.0, Min:06.0)
Ratio Actual Value:7
CPUID: 6F2
Ratio CMOS Setting [Auto]
C1E Support [Enabled]
Max CPUID Value Limit [Disabled]
Intel(R) Virtualization Tech [Enabled]
CPU TM function [Enabled]
Execute Disable Bit [Enabled]
Intel(R) SpeedStep(TM) Tech. [Enabled]
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
NOTE:
Please Key in ratio
numbers directly!
BIOS SETUP UTILITY
Advanced