Asus RX3041 V2 - Manual (Page 24)

22
RX3041 V2 Router User’s Manual
2.4.2 Dynamic IP address
The Host Name is optional, but may be required by some ISPs. The default MAC
address is set to the WAN’s physical interface on the router. Use this address when
registering for Internet service, and do not change it unless it is required by your
ISP, You can use the “Clone MAC Address” button to copy the MAC address of the
Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC
address.
Request IP address: Enter the IP address of the device which you will clone.
MTU: This is optional. You can specify the maximum size of the packets transmitted to
the Internet. Leave it as it is if you do not wish to set a maximum packet size.
MAC Cloning: Enable or disable MAC cloning option.
MAC Address: Enter the MAC address of the device you want to clone.