Asus RX3041 V2 - Manual (Page 43)

RX3041 V2 Router User’s Manual
41
2.10 QoS
QoS (Quality of Service). This option will provide better service of selected network
traffic over various technologies. Deploying QoS management to guarantee that
all application receive the service levels required and sufficient bandwidth to meet
performance expectations is indeed one important aspect of modem enterprise
network.
2.10.1 Port Base
Port Base feature is the solution for managing and avoiding congestion where
the network meets limited broadband bandwidth. The network traffic can be set
maximum rate limits by per-port. You can control bandwidth according to which of
the physical LAN ports and WAN port of your computer or device is plugged into.
Enable Port Rate Control: Make the check mark to enable Port Base function.
LAN-1 ~4 / WAN: Key in the rate value from 1 ~ 100000 (Default is 0). QoS’ Port base
feature let you assign a High or Low traffic (data) priority to LANs and WAN port. You
can enable Port rate control and set an ingress rate limit of Tx/Rx bandwidth traffic.