Asus RX3041 V2 - Manual (Page 27)

RX3041 V2 Router User’s Manual
25
2.4.5 PPTP
The PPTP window allows user to configure basic PPTP settings for the router.
PPTP Account: Enter the PPTP Account provided by the ISP.
PPTP Password: Enter the password provided by the ISP.
Retype Password: Retype the password for confirmation purposes.
PPTP Gateway: If your LAN has a PPTP gateway, then enter that PPTP gateway IP
address here. If you do not have a PPTP gateway, then enter the ISP’s Gateway IP
address above.
IP Address: This is the IP address provided by your ISP to establish a PPTP connection.
Connection ID: This is an optional ID given by the ISP.
MTU: This is optional. You can specify the maximum size of the packets transmitted to
the Internet. Leave it as it is if you do not wish to set a maximum packet size.
Maximum Idle Time: You can specify an idle time threshold (minutes) for the WAN
port. This means if no packet has been sent (no one using the Internet) during this
specified period, the router will automatically end its connection with your ISP.
Connection Mode: Select the connection mode PPTP uses, it includes Keep-alive,
auto-connect and manual-on.
MPPE: To enable or disable Microsoft Point-to-Point Encryption mode.