Asus Terminator C3 - Manual (Page 25)

A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m 2 - 9 2 - 9 2 - 9 2 - 9 2 - 9
Follow these steps to install a PCI
card.
1. Place the chassis on its side.
2. Align the card golden fingers
to the slot and its metal
bracket to the slot opening on
the chassis.
3. Press the card firmly until it is
properly seated in the slot.
4. Secure the card to the metal
bracket on the chassis with a
bracket screw.
P C I s l o t ( P C I 1 ) P C I s l o t ( P C I 1 ) P C I s l o t ( P C I 1 ) P C I s l o t ( P C I 1 ) P C I s l o t ( P C I 1 ) M e t a l b r a c k e t M e t a l b r a c k e t M e t a l b r a c k e t M e t a l b r a c k e t M e t a l b r a c k e t
2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 Expansion card installation Expansion card installation Expansion card installation Expansion card installation Expansion card installation
2.6.3 2.6.3 2.6.3 2.6.3 2.6.3 Configuring an expansion card Configuring an expansion card Configuring an expansion card Configuring an expansion card Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2. Install the software drivers for the expansion card.