Asus Terminator C3 - Manual (Page 31)

A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m 2 - 1 5 2 - 1 5 2 - 1 5 2 - 1 5 2 - 1 5
2.9 Re-connecting cables
You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.
2.9.1 2.9.1 2.9.1 2.9.1 2.9.1 LED cables LED cables LED cables LED cables LED cables
• Connect the power switch power switch power switch power switch power switch and power LED power LED power LED power LED power LED cables to their respective
leads in the PANEL connector on the motherboard.
• Connect the H D D L E D H D D L E D H D D L E D H D D L E D H D D L E D cable to the 2-pin lead marked IDELED.
P o w e r s w i t c h P o w e r s w i t c h P o w e r s w i t c h P o w e r s w i t c h P o w e r s w i t c h
P o w e r L E D P o w e r L E D P o w e r L E D P o w e r L E D P o w e r L E D
H D D L E D H D D L E D H D D L E D H D D L E D H D D L E D
P A N E L P A N E L P A N E L P A N E L P A N E L
* Requires an ATX power supply.
PLED
Ground
PWRBIN
+5 V +5V Speaker
SPEAKER
PLED
Ground
RESET
SMI
ExtSMI# Ground
Reset
Ground Ground
PWRBTN
IDE_LED- IDE_LED+
IDELED