Asus BP5120 - Manual (Page 40)

2-18 Chapter 2: Basic installation
2.6.3 Installing / Uninstalling an optical disk drive
Installing an optical disk drive
To install an optical disk drive:
1. Insert the optical disk to the 5.25 inch drive bay and carefully push the disk
until its screws holes align with the holes on the supporting stand.
2. Pull the retention brackets on both sides of the bay outward and align the
optical disk to the retention brackets.
3. Press the retention bracket locks until they are parallel to the hard disk.
2
3
1
3
1
• You can install an IDE optical disk drive with an IDE power cable and
an IDE cable (A) into the drive bay.
• You can installl a Serial ATA optical disk drive with a Serial ATA power
cable and a Serial ATA cable (B) into the drive bay.
Connect the audio plug on the optical disk to the 4-pin CD connector on the
motherboard to receive audio input.
IDE cable
IDE
Power cable
SATA cable
SATA power cable
A
B