7 replacing the supporting stand and the covers, 1 replace the supporting stand, 2 replace the front panel assembly – Asus BP5120 User Manual
Page 42
2-20
Chapter 2: Basic installation
2.7
Replacing the supporting stand and
the covers
After you have installed all the necessary components on the system, replace the
supporting stand and the covers following the instructions in this section.
2.7.1
Replace the supporting stand
B
A
B
A
2.7.2
Replace the front panel assembly
S
D
M
M
C
C
F
M
D
M
S
S
M
C
1
1
2
To replace the supporting stand:
1. Insert the supporting stand into the
tenons (A).
2. Push down the retention bracket
locks (B) to secure the supporting
stand to the system.
To replace the front panel assembly:
1. Place the system vertically. Insert
the hinge-like tabs on the right edge
of the front panel assembly into
the holes on the right side of the
chassis.
2. Swing the front panel assembly
to the left, then insert the hooks
to the chassis until the front panel
assembly fits in place.