Asus TS700-E7/RS8 - Manual (Page 112)

5-42 Chapter 5: BIOS setup
Chapter 5
Erasing Settings
Erase Event Log [No]
Allows you to select the option in erasing Smbios Event Log. Erasing is done
prior to any logging activation during reset.
Configuration options: [No] [�es, Next reset] [�es, Every reset]
When Log is Full [Do Nothing]
Allows you to select the action when the Smbios Event Log is full.
Configuration options: [Do Nothing] [Erase Immediately]
Smbios Event Log Standard Settings
Log System Boot Event [Disabled]
Allows you to enable/disable the System boot event log.
Configuration options: [Enabled] [Disabled]
MECI [1]
Mutiple Event Count Increment (MECI) is the number of occurrences of a
duplicate event that must pass before the multiple-event counter associated
with the log entry is updated, specified as a numeric value in the range 1 to
255.
METW [60]
Mutiple Event Time Windows (METW)is the number of minutes that must
pass between duplicate log entries that utilize a multiple-event counter. The
value ranges from 0 to 99 minutes.
Custom Option
Log OEM Codes [Enabled]
Allows you to enable/disable the logging of EFI Status Codes as OEM Codes
(if not already converted to legacy).
Configuration options: [Disabled] [Enabled]
Convert OEM Codes [Disabled]
Enable or disable the converting of EFI Status Codes to Standard Smbios
Types (Not all may be translated). Configuration options: [Disabled] [Enabled]
View Smbios Event Log
Press <Enter> to view all smbios event logs.
View System Event Log
Press <Enter> to view all system event logs.