Asus TS700-E7/RS8 - Manual (Page 129)

TS700-E7/RS8 6-9
Chapter 6
13. Follow steps 2 to 12 to configure additional virtual drives.
14. Press <Esc> to finish RAID configuration. When prompted to save
configuration, select Yes from the menu, and press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Select Yes Or No
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 148.580GB 2 64 KB ONLINE
Save Configuration?
Yes
No
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Using New Configuration
When a RAID set already exists, using the New Configuration command erases
the existing RAID configuration data. If you do not want to delete the existing
RAID set, use the View/Add Configuration command to view or create another
RAID configuration.
To create a RAID set using the New Configuration option:
1. From the Management Menu, select Configure > New Configuration, and
press <Enter>.
Management
Configure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Configuration And Start A New Configuration
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option