Chapter 4 – Asus TS700-E7/RS8 User Manual
Page 61
Advertising
TS700-E7/RS8
4-5
Chapter 4
4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI
MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0
RAID. Place the jumper caps over pins 1–2 if you want to use the LSI
MegaRAID software RAID Utility (default); otherwise, place the jumper caps
to pins 2–3 to use the Intel® Rapid Storage Technology Enterprise Option
ROM Utility.
5. ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from
recovery mode when ME become corrupted.
Advertising