Asus V3-M2V890 - Manual (Page 82)

5-24 Chapter 5: BIOS setup
5.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power
Management (APM). Select an item then press <Enter> to display the
configuration options.
5.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface
(ACPI) state to be used for system suspend. Configuration options:
[S1(POS) Only] [S3 Only] [Auto]
5.5.2 ACPI 2.0 Support [Enabled]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [Disabled]
[Enabled]
5.5.3 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
5.5.4 APM Configuration
Suspend Mode [Auto]
ACPI 2.0 Support [Enabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
APM Configuration
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On Ring [Disabled]
Power On PME# [Disabled]
Power On By KBC [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On By RTC Alarm [Disabled]