Asus V3-M2V890 - Manual (Page 85)

5-27 ASUS V-Series M2V890
5.6 Boot menu
The Boot menu items allow you to change the system boot options. Select
an item then press <Enter> to display the sub-menu.
5.6.1 Boot Device Priority
Fan Auto Mode Full Speed Temp [55ºC]
Sets the fan auto mode full speed temperature.
Configuration options: [55ºC] [56ºC] - [75ºC]
CPU temperature beep function [Enabled]
Enables or disables the CPU temperature beep function.
Configuration options: [Enabled] [Disabled]
CPU temperature high limit [95 degree]
Disables or sets the CPU temperature high limit.
Configuration options: [Disabled] [95 Degree] [85 Degree] [75 Degree]
[65 Degree]
Boot Settings
Boot Device Priority
Removable Drives
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
Specifies the boot
sequence from the
available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appear on the screen depends on the the number
of devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]