Asus V2-PH1 - Manual (Page 47)

3-9 ASUS Vintage2-PH1
3.4.2 ASUS PC Probe II
PC Probe II is a utility that monitors the computerʼs vital components that
detects and alerts you of any problem with these components. PC Probe
II senses fan rotations, CPU temperature, and system voltages, among
others. PC Probe II is software-based, allowing you to start monitoring your
computer the moment you turn it on. With this utility, you are assured that
your computer is always at a healthy operating condition.
Installing PC Probe II
To install PC Probe II on your computer:
1. Place the support CD to the optical drive. The Drivers installation tab
appears if your computer has an enabled Autorun feature.
If Autorun is not enabled in your computer, browse the contents of the
support CD to locate the setup.exe file from the ASUS PC Probe II folder.
Double-click the setup.exe file to start installation.
2. Click the Utilities tab, then click ASUS PC Probe II.
3. Follow the screen instructions to complete installation.
Launching PC Probe II
You can launch the PC Probe II right after installation or anytime from the
Windows ® desktop.
To launch the PC Probe II from the Windows ® desktop, click Start >
All Programs > ASUS > PC Probe II. The PC Probe II main window
appears.
After launching the application, the PC Probe II icon appears in the
Windows ® taskbar. Click this icon to close or restore the application.
Using PC Probe II
Main window
The PC Probe II main window allows you to view the current status of your
system and change the utility
configuration. By default, the main
window displays the Preference
section. You can close or restore
the Preference section by clicking
on the triangle on the main window
right handle.
Click to close the
Preference panel