Asus GigaX2048 - Manual (Page 122)

GigaX Series L2 Managed Switch User’s Guide
122
5.3.4 SNMP
[Community Name] [Set]
A community entry contains a community description string and a set of
privileges. Get privilege are turned on by default, and user can specify whether
to give it the Set Privilege while create a new entry.
CLI command: snmp community add
New community string: <new community string>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for ‘yes’; n for ‘no’>
CLI command: snmp community set
User can modify a community entry in the table by reassigning its community
string and privileges.
Community entry (table index): <entry id to config>
Community string (old community string): <new community string>
This action will modify all hosts with community string from 'old community'
to 'new community'.
Are you sure? (y/n):[y] <y for ‘yes’; n for ‘no’>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for ‘yes’; n for ‘no’>
CLI command: snmp community delete
Allows user to delete a community entry from community table.
Community entry (table index): <entry id to delete>
This action will delete all hosts in community string with 'delete community'.
Are you sure? (y/n):[y] <y for ‘yes’; n for ‘no’>