Asus GigaX2048 - Manual (Page 138)

GigaX Series L2 Managed Switch User’s Guide
138
[Reset SSH key]
Reset SSH keys to default value.
CLI command: security radius default
[Show Generating Status]
Show the SSH key generating status. It will display “success” or “SSH keys
generated fail” or “system is generating keys ...”.
CLI command: security sshkey show
[Admin] [Enable/Disable]
Allows user to enable/disable port security of some particular ports.
CLI command: security portsecu admin <enable/disable> <port list/*>
[Violation Mode] [Protect/Restrict/Shutdown]
Allows user to set up the secure violation mode of some particular ports.
CLI command: security portsecu violation violation <mode (1:protect
2:restrict 3:shutdown)> <port list/*>
[Max MAC Addresses]
Allows user to set up maximum number of secure MAC addresses.
CLI command: security portsecu maxaddr <max number of addresses >
<port no>
[Aging Time]
Allows user to set up the aging time of some particular ports.
CLI command: security portsecu age <age time> <port list/*>
[Aging Type] [Absolute/Inactivity]
Allows user to set up aging type of some particular ports.
CLI command: security portsecu agetype <type (1:absolute 2:inactivity)>
<port list/*>