Asus P1-PH1 - Manual (Page 23)

2-7 ASUS Pundit P1-PH1 system
3. Lift the load lever in the direction
of the arrow to a 135º angle.
4. Lift the load plate with your
thumb and forefinger to a 100º
angle (A), then push the PnP cap
from the load plate window to
remove (B).
5. Position the CPU over the
socket, making sure that
the gold triangle is on
the bottom-left corner of
the socket. The socket
alignment key should fit
into the CPU notch.
A l i g n m e n t k e y A l i g n m e n t k e y A l i g n m e n t k e y A l i g n m e n t k e y A l i g n m e n t k e y
G o l d t r i a n g l e m a r k G o l d t r i a n g l e m a r k G o l d t r i a n g l e m a r k G o l d t r i a n g l e m a r k G o l d t r i a n g l e m a r k
L o a d p l a t e L o a d p l a t e L o a d p l a t e L o a d p l a t e L o a d p l a t e
A
B
The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!
6. Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
A
B