Asus P1-PH1 - Manual (Page 74)

5-16 Chapter 5: BIOS setup
5.4.4 Onboard device configuration
The items in this menu show the onboard device configuration settings.
Select an item then press <Enter> to display a pop-up menu with the
configuration options.
Onboard IEEE 1394 [Enabled]
Onboard LAN [Enabled]
OnChip IDE Device
Onboard Device
Primary Display Adapter [PCI]
Onboard LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [ECP+EPP]
ECP Mode Use DMA [3]
Select Menu
Item Specific Help
Onboard Device Configuration
Onboard IEEE 1394 [Enabled]
Allows you to enable or disable the onboard IEEE 1394 controller.
Configuration options: [Enabled] [Disabled]
Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller. Keep the
default enabled if you wish to use the onboard LAN feature. Set to
[Disabled] if you installed a PCI LAN card.
Configuration options: [Disabled] [Enabled]
OnChip IDE Device
IDE DMA transfer access [Enabled]
Select Menu
Item Specific Help
OnChip IDE Device
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access function.
Configuration options: [Disabled] [Enabled]