Asus Vintage - Manual (Page 31)

A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 2 - 1 5 2 - 1 5 2 - 1 5 2 - 1 5 2 - 1 5
2.8 Installing a CD-ROM drive
Refer to the instructions in this section to install a CD-ROM drive.
To install a CD-ROM drive:
1. Place the chassis upright.
2. Remove the side plate and
front cover. Refer to section
2.3 for details.
3. Remove the drive bay plate by
pressing the lock tabs in the
direction of the arrows.
C D - R O M s c r e w h o l e s C D - R O M s c r e w h o l e s C D - R O M s c r e w h o l e s C D - R O M s c r e w h o l e s C D - R O M s c r e w h o l e s
5. Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes on the bay as shown.
C D - R O M s c r e w s C D - R O M s c r e w s C D - R O M s c r e w s C D - R O M s c r e w s C D - R O M s c r e w s
4. Insert the CD-ROM drive into
the upper 5.25-inch drive bay.
3 3 3 3 3 3 3 3 3 3
6. Secure the CD-ROM with two
screws.
3 3 3 3 3
4 4 4 4 4
5 5 5 5 5