Asus Vintage User Manual
Page 81
A S U S V i n t a g e - S 8 0 0
A S U S V i n t a g e - S 8 0 0
A S U S V i n t a g e - S 8 0 0
A S U S V i n t a g e - S 8 0 0
A S U S V i n t a g e - S 8 0 0
5 - 2 3
5 - 2 3
5 - 2 3
5 - 2 3
5 - 2 3
5.5.5
5.5.5
5.5.5
5.5.5
5.5.5
APM Configuration
APM Configuration
APM Configuration
APM Configuration
APM Configuration
Restore On AC Power Loss
[Always OFF]
Power On By PS2 KeyBoard
[Disabled]
Power On By PS2 MOUSE
[Disabled]
Power On By Internal MAC LAN
[Disabled]
Power On By PCI Devices
[Disabled]
Power On By External Modems
[Disabled]
Power On By RTC Alarm
[Disabled]
<Enter> to select whether
or not to restart the
system after AC power
loss.
Restore on AC Power Loss [Always OFF]
Restore on AC Power Loss [Always OFF]
Restore on AC Power Loss [Always OFF]
Restore on AC Power Loss [Always OFF]
Restore on AC Power Loss [Always OFF]
When set to [Always Off], the system goes into off state after an AC
power loss. When set to [Always On], the system goes on after an AC
power loss. When set to [Keep previous state], the system goes into either
off or on state whatever was the system state before the AC power loss.
Configuration options: [Always Off] [Always On] [Keep previous state]
Power On By PS/2 KeyBoard [Disabled]
Power On By PS/2 KeyBoard [Disabled]
Power On By PS/2 KeyBoard [Disabled]
Power On By PS/2 KeyBoard [Disabled]
Power On By PS/2 KeyBoard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Power On By PS/2 MOUSE [Disabled]
Power On By PS/2 MOUSE [Disabled]
Power On By PS/2 MOUSE [Disabled]
Power On By PS/2 MOUSE [Disabled]
Power On By PS/2 MOUSE [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to resume the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By Internal MAC LAN [Disabled]
Power On By Internal MAC LAN [Disabled]
Power On By Internal MAC LAN [Disabled]
Power On By Internal MAC LAN [Disabled]
Power On By Internal MAC LAN [Disabled]
Enables or disables MAC wake from sleep state.
Configuration options: [Disabled] [Enabled]