Armasight DAB10X42RF0ARM1 10x42 Binoculars - Manual (Page 11)

11
The 7x50 reticle has horizontal scale and vertical scale, in the below there is measuring reticule accord-
ing to the known height (see Figure 7). Vertical and horizontal lines on the reticule is in mils as unit. Each
small division on both vertical and horizontal lines represents 5 mils and each big division represents
10 mils. You can obtain the azimuth angle, upper and lower angle, distance and height or width etc. by
using this reticle. The fast distance measurement is regards as the target as 2 metres high to measure
the distance quickly.
The 8x36 reticle has horizontal scale and vertical scale, in the below there is measuring reticle accord-
ing to the known height (see Figure 8). Vertical and horizontal lines on the reticule is in mils as unit. Each
small division on both vertical and horizontal lines represents 5 mils and each big division represents
10 mils. You can obtain the azimuth angle, upper and lower angle, distance and height or width etc. by
using this reticle. The fast distance measurement is regards as the target as 2 metre high to measure
the distance quickly.
Figure 6. 7x50C and 8x30C Reticle
Figure 7. 7x50 Reticle
Figure 8. 8x36 Reticle