Armasight DAB10X42RF0ARM1 10x42 Binoculars - Manual (Page 16)

16
In order to insure precise angle measurements, be away from the ferromagnetism material during the
working condition. (such as cannon, tanks, battle vehicle, high voltage, transformer substation, fer-
romagnetic mill, electric & ferromagnetic appliance),otherwise the compass will work in big error or
improperly.
And the binoculars should be kept horizontal and level when reading the compass. The upper and
lower angle can not be over ±15°, The object should lie in the middle of the reticule.
The graduations of the compass need to be illuminated for convenient viewing when there is not suf-
ficient daylight to illuminate the compass dial. Press the illuminator button, the compass scale will be
illuminated in red light for easy viewing.
3.7 FOLD-DOWN EYECUPS USING
Armasight Binoculars designed with rubber fold-down eyecups. The fold-down eyecups can halps
when wearing gas mask or glass.
3.8 TRIPOD MOUNTING
A standard threaded socket in 1/4 inch for tripod attachment is located at the base of this binoculars
shaft Insert a binoculars tripod adapter , and attach your tripod screw to the base of the adapter.
Figure 17. Fold-down Eyecups