C2G 32568 UKV-048OSD_088OSD_0168OSD - Manual (Page 22)

UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
3.2. Operate the Switch
The following will describe each command operation of the KVM Switch and
available ways to execute the commands, either by a front-panel button, a keyboard
hotkey sequence or an OSD Menu option.
<Select PC>
Front-Panel Button
Press the corresponding button on the specific switch, to which the channel you
want to select is connected.
Hotkey
(a) (y) (z) (b) Scr
Lk
Scr
Lk
Select PC =
bank
number
(01 ~ 16)
port
number
(01 ~ 16)
For example, when with multiple daisy-chained KVM Switches configuration, if
you want to select bank 3 port 7, you should press the following keystrokes:
0 0 7 3 Scr
Lk
Scr
Lk
Select PC =
bank
number
(03)
port
number
(07)
However, when using single KVM Switch configuration, if you want to select port 7,
you should first press its default bank number 01 and then the port number 07:
0 0 7 1 Scr
Lk
Scr
Lk
Select PC =
Page 22
Since the single KVM Switch bank number is
its own), therefore you should always specified its bank number by “01”.
bank
number
(01)
port
number
(07)
default to 01 (i.e. itself a master KVM Switch on
Chapter 3 Operation