C2G 32568 UKV-048OSD_088OSD_0168OSD - Manual (Page 23)

UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
OSD
To activate the OSD Menu, hit ScrLk + ScrLk + Space Bar. While the OSD Menu is
active, use the cursor keys to navigate to the channel you want and then hit Enter
or Insert key to select.
In a daisy-chained configuration, you may want to select specific channel on a
specific bank (when you have daisy-chained multiple KVM switch units), just use
the Page up/Page Down key for bank selection and navigate the OSD Menu by
cursors key to the channel you want to select and hit Enter to make it your active
channel.
<Next lower channel>
Front Panel Button
Press the corresponding button.
Hotkeys
Page 23
Next lower channel =
OSD
Select the corresponding OSD Menu option.
<Next Higher Channel>
Front Panel Button
Press the corresponding button.
Hotkeys
Next higher channel =
OSD
Select the corresponding OSD Menu option.
<Next Lower Bank> (when daisy-chained)
Front Panel Button
Press the corresponding button.
Scr
Lk
Scr
Lk
Scr
Lk
Scr
Lk
Page
Up
Scr
Lk
Scr
Lk
Hotkeys
Previous bank =
OSD
While the OSD is activated on the console screen, press the Page Up key to rotate
through the bank selections decrementally.
Chapter 3 Operation