C2G 32568 UKV-048OSD_088OSD_0168OSD - Manual (Page 28)

UKV-048OSD/088OSD/0168OSD Rackmount KVM Switch User Manual Rev. 1.8 July 2004
enabled by this OSD option. Then next time when you will leave your admin desk, you can then
press reset hotkey sequence: ScrLk + ScrLk + End (or by pressing the last button for over 2
seconds). Then the KVM Switch will go reset and next user will be asked for correct password to
gain access to KVM operation, thus your local console security cannot be compromised anymore
even when you are not present.
<Password Change>
OSD
Navigate with cursor keys downward to the PWD CHANGE option and then hit
Enter key or Insert key to select. A Prompt will appear on screen to request for old
password. Type in the old password and a new prompt will appear to request for
your new password. Type in the new password and press Enter for confirmation.
The password length is up to 8 characters long.
PWD CHANGE
ENTER PASSWORD - - - - - - - -
ESC QUIT Enter SELECT ESC QUIT Enter SELECT
ENTER NEW PASSWORD - - - - - - - -
ESC QUIT Enter SELECT ESC QUIT Enter SELECT
RETYPE NEW PASSWORD - - - - - - - -
ESC QUIT Enter SELECT ESC QUIT Enter SELECT
Page 28
Chapter 3 Operation