Lcd settings – Xoro HTC 2233HD User Manual

Page 112

Advertising
background image

44

HTC2233HD/2433HD

Engl

ish

LCD Settings

Picture setting

Colour Temperature
With the

◄ or ► buttons you can select the level of colour temperature. The three preset options are

Cool, Warm, Medium and User.
You can define you own settings if you uses the USER options. Than you can get access to the three
colours “Red”, “Green” and “Blue”. Select the level of each colour by using the

◄ or ► buttons.



Aspect Ratio
With the

◄ or ► buttons you can select the aspect ratio and changes the view on the screen. The

options are:

16:9 - The picture is every time in full screen mode, independent from the supported aspect
ratio.

4:3 - The picture view is 4:3 and shows on the left and right side a black bar, independent
from the supported aspect ratio.

Auto - The view is defined by the supported aspect ratio and the adjustment is automatically.
By 16:9 is the picture in full screen and by 4:3 show the screen the black bars on the right
and left side.

Zoom 1 - This option can be used for an 4:3 aspect ratio. The picture is zoomed into full
screen by keeping the aspect ratio. Parts of the picture will be cut-off (specially on the top or
bottom side) and can not seen anymore.

Zoom 2 - This option can be used for an 16:9 widescreen or cinemascope picture. The
picture is zoomed into full screen by keeping the aspect ratio. Parts of the picture will be cut-
off (specially on the right and left side) and can not seen anymore.

Panorama - Good option if film will be in CinemaScope format. The image is enlarged until
The black edges vanish above and below. However, on the right and left side are also image
information is lost.


By every source except the internal DVD-Player you can change the aspect ratio by pressing the
RED button on the remote control.

Note:
Do not uses the 4:3 aspect ratio every time, because you can damage the TFT LCD screen.


Noise Reduction
With the

◄ or ► buttons you can activate or deactivate the noise reduction. The option are:


Off

Noise reduction is off

Low

The TV set produces a little noise reduction

Middle

Middle strength of noise reduction

High

Strong strength of noise reduction - often with too much sharpness

Default

Standard option for noise reduction


Note:
Adjust the noise reduction in order your own impression.

Advertising
This manual is related to the following products: