Xoro HTC 2233HD - Manual (Page 87)

HTC 223$HD/2433HD 19
Engl
ish
Connection
Component Y Pb Pr Video– and Stereo Audio input
If you uses more than one multimedia terminals and the
SCART, HDMI and Video connection are used, than you
connect the next device by the audio/video component input
(Y Pb Pr). Please connect the video adapter cable (not
supplied with the TV) with the phone phone jack into YPbPr
jack plug of the TV set. Connect the 3-wire video component
cable to the RCA jack of the adapter cable and the other end
to the multimedia device. Please pay attention to the
coloured coding of the cable, inputs jacks (adapter cable) and the video output jacks (source):
•
“Y” with the green wire or RCA plug
•
“Pb” with the blue wire or RCA plug
•
“Pr” with the red wire or RCA plug
With this kind of connection only video signals are transmitted. For listening sound on the TV you
should establish also a sound connection. Please connect the white and red wire of the 2-pin
component cable with the AUDIO OUT (source) and the RCA jack with the “L-in” and “R-in” of the TV
set.
Please press the INPUT button, choose „YPbPr“ in the popup window and confirm by the OK button.
Video– and Stereo Audio input
If you uses more than one multimedia terminals and the SCART,
HDMI and YPbPr video connection are used, than you connect
the next device by composite. Please connect the CVBS cable
with the CVBS input of the TV set and with the CVBS output of
the multimedia device. With this kind of connection only video
signals are transmitted. For listening sound on the TV you should
establish also a sound connection.
Please connect the white and red wire of the 2-pin component
cable with the AUDIO OUT (source) and the RCA jacks “L-in”
and “R-in” of the TV set.
Please press the INPUT button, choose „AV“ in the popup window and confirm by the OK button.
USB Port
The USB port has different functions:
1. PVR
function
2. Time Shift Function
3. Playback of recorded TV programs
4. Playback of Video, Audio and Picture content from USB storage
5. Install new firmware version
Please press the INPUT button, choose „USB“ in the popup window and confirm by
the OK button.